roulements GAC140S AST

Spherical Roulements à billes / Angular Contact - Steel, PTFE Fabric, PTFE Plastic / Metric Series GAC140S

Numéro de roulement : GAC140S

Taille mm : 140x210x45

Marque : AST

Diamètre de l'alésage mm : 140

Diamètre extérieur mm : 210

Largeur mm : 45

Dimensions et spécifications du roulement dans le catalogue des marques :

dimensions in mm

Bearing Type - steel-on-steel

Bore Dia d - 140.0000

Outer Dia D - 210.0000

Largeur B - 45.0000

Outer Largeur Bo - 43.0000

Inner Largeur Bi - 45.0000

Dynamic Load Rating Cr - 740,000

Static Load Rating Cor - 3,740,000

Max. shaft corner radius, or 45 deg. chamfer ch1 - 2.500

Max. housing corner radius, or 45 deg. chamfer ch - 2.500

Spherical Diameter dk or Dk - 198.000

Mis-alignment Angle a deg. - 1

Lubrication Groove Location A - 19.000

Spherical Center Location S - 19

Weight g - 6,330.00

Material - 52100 Chrome steel, or equivalent

The inner and outer rings are coated with molybdenum disulphide for reduced sliding friction.

This spherical plain bearing has an outer ring groove and thru holes for relubrication.

This spherical plain bearing has two crossed grooves on the load face of the outer ring to enhance the spreading of the grease lubrication.

This spherical plain bearing must be properly lubricated with grease.

A single bearing can only accept axial loading in one direction. A pair of opposing bearings are required for radial loading and bi-direction axial loading.